AV&V's Solid Carbide Valve Guide Reamers
For Manganese bronze only; Do not use with cast iron guides

Tired of loosing your time honing and fitting valve guides?

Here is why AV&V reamers are now used by the top cylinder head shops in the industry
 
  • Specially designed by AV&V for use with manganese bronze material, these unique reamers feature a longer pilot for a perfect aligment with the valve guide while reaming.
 
  • You will ream a valve guide to exact dimension without any taper in 4 to 5 seconds only.
 
  • Guides will last longer than with the honing method because there is no crosshatch left after reaming.
 
  • One size allows you to fit both intake & exhaust if you use AV&V valves & guides.
 

Diameter
Application
Part No.
4.0MM
4.0MM guides
VGRC4MM
4.5MM
4.5MM guides
VGRC4.5MM
5.0MM
5.0MM guides
VGRC5MM
5.5MM
5.5MM guides
VGRC5.5MM
6.0MM
V-Rod
VGRC6MM
7.0MM
7.0MM guides
VGRC7MM
.2766"
*7MM TC/Sportster
VGRC2766
.3110"
Evo/TC/Sportster
VGRC3110
.3115"
Evo/TC/Sportster
VGRC3115
.3120"
**Evo/TC/Sportster
VGRC3120
8MM
8MM guides
VGRC8MM
.3777"
Pan / Shovel
VGRC3777
.3782"

***Pan / Shovel
VGRC3782

*Harley-Davidson 7MM valve guides I.D.are actually 7MM+.001" (.2766")

**Recommended size for all Evo/TC AV&V 5/16 valves

***Recommended size for all Pan/Shovel AV&V valves